A lot of pictures on this site were hosted on Photobucket before they disabled photo embedding. If you'd like to see pictures for a particular post, please let me know, and I'll prioritize getting those images fixed next!

Wednesday, June 10, 2009

3-Axis Frankenstein Sculpted and Molded!

Here's where he's at now.






Plaster time! I started making the mold a while back.
First the mold walls built around the first half of the sculpt...

Then two brushed on layers of UltraCal-30 (actually, the picture is only of the first layer, but you get the idea)...

Then a thicker layer...

And an even thicker layer...

And then I ran out of U-30. I had to order some more from MonsterMakers.com.


I saw this nifty little trick to make a flat surface for the mold to sit on in Lee Baygan's book.

It worked out pretty well.

Here's the underside with the escape holes modeled in (before I cleaned up the edges and keys with a dremel).



I finished the second half of the mold a a few days later, having coated the the exposed U-30 of the first half with vaseline. It's about four layers of plaster, a layer of burlap soaked in plaster, then another layer of plaster.

I managed to separate them after a half hour of shoving pliers and paintbrush handles into the escape holes...

Then I spent an equal amount of time trying to get the skull out. I ended up working the jaw off, then using the PVC (which was screwed on) as a lever to work it free...

Finally, I cleared out the plaster (which came out very easily because I sealed it)...

I think it came out pretty good. There are some imperfections which (I hope) I can easily clean up, but overall I'd say it's in pretty good shape.

4 comments:

  1. MAKE HIM TALK MAKE HIM TALK MAKE HIM TALK! Throw the switch! Pull duh strings!!!

    ReplyDelete
  2. This is really cool, I can't wait to see him in action...!!!

    ReplyDelete
  3. how are you so amazing at this stuff? 0___0

    take lots of photos at Halloween this year since I won't be there to see ;_;

    ReplyDelete